Skip to content

Check redfish-systems

Overview

Checks the overall system health reported by a Redfish-compatible server via the Redfish API. Reports every enabled system member with its identification (manufacturer, model, hostname, SKU, serial number), compute summary (processors, BIOS version, power state, indicator LED) and rolled-up health status, and alerts whenever any system's status leaves OK. Use redfish-storage for drive- and storage-controller-specific monitoring.

Important Notes:

  • Tested on DELL iDRAC and DMTF Simulator
  • A check usually completes within a few seconds, but a slow or retried request can take longer. The bundled Director basket allows a 60 second runtime timeout.
  • This check runs with both HTTP and HTTPS. It uses GET requests only.
  • No additional Python Redfish modules need to be installed.
  • This check reports system-level (rolled-up) health only. For dedicated component monitoring use redfish-storage, redfish-memory, redfish-processors, redfish-ethernetinterfaces, redfish-sensors, redfish-managers or redfish-firmwareinventory.

Data Collection:

  • Queries /redfish/v1/Systems to enumerate system members
  • For each member, reads the identification, compute summary and rolled-up health status
  • Reads each collection in a single request via the Redfish $expand query where the controller supports it, otherwise falls back to one request per member
  • Uses HTTP Basic authentication if --username and --password are provided
  • Only evaluates systems in "Enabled" or "Quiesced" state

Fact Sheet

Fact Value
Check Plugin Download https://github.com/Linuxfabrik/monitoring-plugins/tree/main/check-plugins/redfish-systems
Nagios/Icinga Check Name check_redfish_systems
Check Interval Recommendation Every 5 minutes
Can be called without parameters No (--url is required)
Runs on Cross-platform
Compiled for Windows No (runs with Python interpreter)
Uses State File $TEMP/linuxfabrik-monitoring-plugins-redfish.db

Help

usage: redfish-systems [-h] [-V] [--always-ok] [--cache-expire CACHE_EXPIRE]
                       [--insecure] [--inventory] [--no-insecure]
                       [--no-perfdata] [--no-proxy] [--password PASSWORD]
                       [--proxy PROXY] [--retries RETRIES] [--timeout TIMEOUT]
                       --url URL [--username USERNAME] [--verbose]

Checks the overall system health reported by a Redfish-compatible server via
the Redfish API. Reports every enabled system member with its identification
(manufacturer, model, hostname, SKU, serial number), compute summary
(processors, BIOS version, power state, indicator LED) and rolled-up health
status, and alerts whenever any system's status leaves `OK`. Use
`redfish-storage` for drive- and storage-controller-specific monitoring.

options:
  -h, --help            show this help message and exit
  -V, --version         show program's version number and exit
  --always-ok           Always returns OK.
  --cache-expire CACHE_EXPIRE
                        The amount of time after which the credential/data
                        cache expires, in minutes. Default: 5
  --insecure            This option explicitly allows insecure SSL
                        connections.
  --inventory           Output the parsed components as JSON on stdout and
                        exit OK, instead of running a health check. Use this
                        to collect a hardware inventory: the JSON is a single
                        object keyed by component type, so the output of
                        several Redfish checks can be merged into one
                        inventory document with `jq --slurp`.
  --no-insecure         Verify the TLS certificate against the system trust
                        store, overriding the insecure default of this check.
                        Use it once the endpoint presents a publicly trusted
                        certificate, or once its CA has been added to the
                        system trust store.
  --no-perfdata         Suppress the performance data section from the output.
                        The status message and the exit code are unaffected,
                        so alerting keeps working while trending data is
                        dropped.
  --no-proxy            Do not use a proxy, not even one the environment
                        names. Overrides `--proxy`.
  --password PASSWORD   Redfish API password.
  --proxy PROXY         Proxy to reach the target through. The scheme defaults
                        to `http` when omitted. Overrides the proxy the
                        environment names (`http_proxy`, `https_proxy`,
                        `all_proxy`) together with the exceptions it lists in
                        `no_proxy`, and is itself overridden by `--no-proxy`.
                        Without either parameter the environment applies.
                        Credentials belong into the environment variable
                        rather than here, because a command-line argument is
                        visible to every user on the host. Example:
                        `--proxy=http://proxy.example.com:3128`.
  --retries RETRIES     Number of extra attempts if a request to the Redfish
                        API fails, before the check gives up. Helps against an
                        occasionally slow or flaky management controller.
                        Default: 3
  --timeout TIMEOUT     Network timeout in seconds. Default: 8 (seconds)
  --url URL             Redfish API URL.
  --username USERNAME   Redfish API username.
  --verbose             Makes this plugin verbose during the operation. Useful
                        for debugging and seeing what is going on under the
                        hood. For this check that also appends every Redfish
                        response it evaluated to its output, ready to be
                        attached to a bug report, and writes a trace of every
                        Redfish request, with timings, to linuxfabrik-
                        monitoring-plugins-redfish-trace.log below the
                        temporary directory. Unlike this check's output, the
                        trace survives a check that the monitoring server
                        terminates for exceeding its timeout, which is what
                        makes it useful against a slow management controller.
                        Passwords and session tokens are kept out of both. The
                        output grows with the responses, so keep this switched
                        on in a service definition only while chasing a
                        problem.

Documentation:
https://linuxfabrik.github.io/monitoring-plugins/check-plugins/redfish-systems/

Usage Examples

./redfish-systems --url=https://bmc --username=redfish-monitoring --password='linuxfabrik'

Output:

Everything is ok. Checked system health on 1 member.

Member: Contoso 3500, HostName: web483, Processors: 2x Multi-Core Intel(R) Xeon(R) processor 7xxx Series (16 logical), BIOS: P79 v1.45 (12/06/2017), Power: On, LED: Off, SKU: 8675309, SerNo: 437XR1138R2

States

  • OK if every enabled system reports a healthy rolled-up state.
  • WARN if a system health or health rollup state is "Warning".
  • CRIT if a system health or health rollup state is "Critical".
  • --always-ok suppresses all alerts and always returns OK.

Perfdata / Metrics

There is no perfdata.

For Maintainers

You don't need a physical server with a real BMC (the management controller that serves the Redfish API, e.g. HPE iLO or Dell iDRAC) to develop or test this plugin. The official DMTF Redfish mockup server serves a static, read-only Redfish tree (including a Systems collection) over plain HTTP, which is exactly what this GET-only plugin needs.

Run the mockup server and point the plugin at it, from the repository root:

podman run \
    --detach --rm \
    --name lfmp-redfish-mock \
    --publish 5000:8000 \
    docker.io/dmtf/redfish-mockup-server:latest
sleep 3
check-plugins/redfish-systems/redfish-systems --url=http://127.0.0.1:5000 --no-proxy
podman stop lfmp-redfish-mock

Use http://127.0.0.1:5000 rather than http://localhost:5000, because localhost may resolve to IPv6 (::1) while the published container port is bound to IPv4.

The fixtures under unit-test/stdout/ are the output of --verbose runs, one file per scenario, with a ### GET <path> block for every Redfish response the plugin evaluated. The test suite replays them instead of calling a controller, so the output a user attaches to a bug report becomes a new scenario as it is, whatever the number of members. To simulate a fault, copy a healthy scenario and edit the system's Status.Health to Critical or Warning. The offline test suite is run with ./run from the unit-test directory.

Credits, License